hello friends , today i am going to tell you some frequently asked question from AutoCad interview.
commanly these questions are asked many times .
SO these are the questions below:-
Q 1: What is Drawing?
Ans: Representation of any object on paper by pen or pencil.
Q 2: What is technical drawing?
Ans: A precise and detailed drawing of an object, as employed in architecture or engineering.
Q 3: what is third angle projection?
Ans: Third Angle projection is a method of orthographic projection which is a technique in portraying a 3D design using a series of 2D views. An alternative method to Third Angle Projection is First Angle Projection. … 3rd Angle project is where the 3D object is seen to be in the 3rd quadrant.
Q 4: What is the difference between first angle and third angle projection?
Ans: This means that the Vertical Plane is behind the object and the Horizontal Plane is underneath the object. In Third Angle Projection the Object is placed in the Third Quadrant. … These changes in the position of the views are the only difference between projection methods.
Q 5: What is isometric drawing?
Ans: A representation of a 3D solid on a 2D surface is called a projection. Isometric projection uses vertical lines and lines drawn at 30° to horizontal. A 30° set square is used to ensure accuracy. This makes it easy to draw the projection to scale from a plan view.
Q 6: What is CAD?
Ans: CAD is a application software. Which means COMPUTER AIDED DESIGN.
Q 7: AutoCad was first released in the year?
Ans: 1982.
Q 8: How many units are available in AutoCad?
Ans: There are 5 units in AutoCad :-
- Architecture
- Decimal
- Engineering
- Fractional
- Scientific.
Q 9: How many work spaces in AutoCad?
Ans: There are 4 work spaces in AutoCAd:-
- Drafting & Annotation
- 3D basic
- 3D modeling
- AutoCAd classic
Q 10: How many grip points does a circle have?
Ans: There are 5 grip point in a circle.
Q 11: What is the default size of an AutoCad graphics window?
Ans: 12”×9”
Q 12: Angle between the three principal axis of an isometric drawing is?
Ans: 120 degree.
Q 13: In AutoCAd graphics window, menu bar is located?
Ans: Menu bar is located below the title bar.
Q 14: Which command creates a new object parallel to the original object?
Ans: Offset command.
Q 15: What is the meaning of UCS in AutoCad?
Ans: User coordinate system.
A VERY THANK YOU AZHAR SIR
Your welcome , and stay connected with us for more useful updates like this and 2nd part of this article will be comming soon ……
Yeah Sure
good it is very usefull
yess
This blog was… how do you say it? Relevant!!
Finally I have found something which helped me. Thank you!
Thanks a lot for sharing this with all folks you actually recognise what you are speaking about!
Bookmarked. Please additionally discuss with my site =).
We may have a link exchange arrangement between us
Great info. Lucky me I ran across your site by chance (stumbleupon).
I have book marked it for later!